The Koch Superlead pre-amp pedal.
The tube-powered guitar preamp from Koch, with contemporary overdrive and boost, and maximum functionality!
The Superlead guitar preamp is as much at home in your rehearsal room as it is in the studio or on-stage. Whether used as a stand-alone preamp, or in conjunction with your
pedalboard, your guitar signal can be routed to any amplification device, recording or mixing console as well as to any monitor system you are using. The Superlead has two independent channels (Clean & Overdrive) which share a 3 band EQ, plus a Boost switch for high gain. The Clean channel is focused on clarity and full frequency response to
accurately reproduce your guitar's tone. The Overdrive channel fattens that sound with a lush contemporary gain that can be stepped up to high gain with the Boost switch, for flat out chunk or those singing leads with almost endless sustain.....taking you from the pop world to hard-rock with a couple of silent switches.
The Koch Superlead also features both pre and post FX loops for adding tone shaping pedals before the pre-amp, and modulating pedals after the pre-amp. There is a 9VDC output that can power those additional pedals up to 200 mA, and is fully protected against short-circuit. The remote control input can be used with midi switchers or other external switching devices. Finally, there is a balanced XLR DI output with line level signal, speaker emulation and ground-lift for connection to recording or mixing consoles, and a 1/4" output with switch-able levels for connection to any type of amp or monitor. Both outputs can be used simultaneously.
The Koch Superlead is the perfect tube powered preamp for rehearsal, recording, touring and fly-ins where you need to take 'your sound' with you. We use only the highest grade components for the best sound and reliability, plus we have housed the Superlead in a heavy duty, yet light weight aluminum housing.
- One 12AX7 Preamp tube
- Tube operating Voltage 285VDC
- Clean Channel with Volume control
- Overdrive Channel with Gain and Volume controls
- Silent (clickless) switches for Clean/Overdrive and OD Boost (with LED on/off Indicators)
- Shared 3-Band EQ section
- Non-buffered Pre-FX Loop
- Fully buffered Post-FX Loop
- Monitor Output with (OdbV) for Power Amp, (-10 dbV) to FX return and (re-amp) to Clean Channel input
- Balanced XLR DI REC/PA Output with speaker emulation
- Remote Control Input (for midi switcher or external switching)
- 12VAC power supply input (adaptor is included)
- 9VDC/200mA power supply output
- Dimensions: 13.2 cm w x 20.5 cm d x 6.4 cm h
- Weight 1.2 kg